FR4 G10 G11 Epoxy Glass Fiber Laminate Sheet

FR4 G10 G11 Epoxy Glass Fiber Laminate Sheet

FR4 G10 G11 Epoxy Glass Fiber Laminate Electrical Insulation Board
Using non-alkali glass fiber cloth, impregnated with epoxy resin by hot pressing. It has high mechanical and electrical properties, good heat resistance and humidity resistance. Products are widely used in mechanical, electronic, electrical equipment, insulation parts and components.
EPGC202/203/204/306/308 apply 7628 glass fiber cloth and imported epoxy resin, it has higher mechanical properties, electrical properties, high thermal mechanical strength.

Parameter

 Name

IEC

NEMA

colour

 Main component

Characteristics

 Heat resistance grade

3240 EPGC201 Natural color Non-Alkali fiberglass cloth, epoxy resin Higher mechanical and electrical properties, better heat resistance, humidity resistance

Products are widely used in mechanical, electronic, electrical equipment, insulation parts and components

B

EPGC202

FR-4

Natural color/green Electronic use fiberglass cloth, imported epoxy resin, flame retardant The performance is similar to that of EPGC201, and the flame retardancy is improved to UL F-V0 grade. It is suitable for the insulation structure of motor and electrical equipment with flame retardant requirements F class

F

341/3248 EPGC203

G-10

Natural color/green Electronic use fiberglass cloth and heat resistant epoxy resin The performance is similar to that of EPGC201, but the heat resistance is improved, the mechanical strength is high at high temperature, the electrical property is excellent, and have anti static electricity ,,is applied to the insulation structure parts of transformer, high voltage switch and motor

F

EPGC204

FR-5

Natural color/green Electronic use fiberglass cloth, heat resistant epoxy resin, flame retardant The performance is similar to that of EPGC203, and the flame retardancy is improved to UL F-V0 grade. It is suitable for the insulation structure parts of motor and electrical equipment with flame retardant requirements F class

F

EPGC306

G-11

Natural color/green Electronic use fiberglass cloth and heat resistant epoxy resin The performance is similar to that of EPGC203, and the resistance index is improved. It is suitable for high voltage DC power transmission and transformation equipment, large hydro generator set and other F class electrical equipment insulation structure parts

F

EPGC308

Natural color/green Electronic use fiberglass cloth and heat resistant epoxy resin The performance is similar to EPGC203, which improves heat resistance, higher mechanical and electrical performance, stable mechanical energy under high temperature, and is suitable for H class transformer and motor insulation structure parts

H

Note: Due to continuous product improvement, the dimensions provided in this sample are for reference only. If necessary, our company can design and produce according to user requirements. Please contact the company in time.

Magnetic Laminated Glassfiber Sheet

Magnetic Laminated Glassfiber Sheet

Magnetic laminated glassfiber sheet
It adopts electrical non-alkali fiberglass cloth impregnated with resin and adds the magnetic material then is formed by baking hot pressing. It is with high mechanical properties and heat resistance, with a certain permeability, can be raw materiasl of magnetic wedge. It can be used in large motors, wind turbines.Hear resistance class is F-class.

Parameter

Standard: JB/T10508-2005

No.

Project

Unit

Index

1

Appearance

Smooth surface, uniform color, no bubbles, no wrinkles, edge cutting neat, no stratification.

2

Density

g/m³

2.4-2.5

3

Bending strangth

MPa

≥180

4

Heat (200℃ 24h)

No stratification, no break.

5

Relative permeability(80KA/m)

≥3.0

6

Temperature index

≥155

7

Water absorbing

≤0.5

Note: Due to continuous product improvement, the dimensions provided in this sample are for reference only. If necessary, our company can design and produce according to user requirements. Please contact the company in time.

3241 Semiconductor Laminated Glassfiber Sheet

3241 Semiconductor Laminated Glassfiber Sheet

Semiconductor laminated glassfiber sheet 3241
It adopts electrical non-alkali glassfiber cloth impregnated with epoxy resin and adds conductive ingredients and then is formed by baking. It is with high mechanical and semiconductor properties, good heat resistance, suitable for large motor slot wedge Anti-corona material. Heat resistance class is B.

Parameter

No.

Project

Unit

3021

3025

3025—A

3026

3027

3241

1

Appearance

Smooth surface, uniform color, no bubbles, no wrinkles, edge cutting neat, no stratification.

2

Density

g/m³

1.25~1.4

1.3~1.4

1.75-1.90

3

Vertical layer bending strength(normality)

MPa

≥120

≥100

≥90

≥110

≥125

≥300

4

Tensile strength

MPa

≥100

≥80

5

Parallel impact strength

(Simply supported beam)

KJ/m2

≥7.8

≥50

6

Parallel layer shear strength

MPa

≥10

≥25

≥25

≥20

≥25

≥30

7

Adhesive strength

N

≥3600

8

Electrical strength

Vertical layer(in 90℃transformer oil )( thickness 1mm )

Kv/mm

≥15.8

≥5.1

≥5.1

≥5.1

≥5.1

≥8.0

Parallel layer breakdown voltage(in 90℃transformer oil )

kv

≥35

≥20

≥35

9

Insulation resistance after water immersion

Ω

≥5*107

≥1.0*108

10

Dielectric constant(1MHz)

≤5.5

11

PTI

≥100

12

Water absorbing ( thickness 1-20mm)

mg

180~970

206~406

136~277

64-193

Note: Due to continuous product improvement, the dimensions provided in this sample are for reference only. If necessary, our company can design and produce according to user requirements. Please contact the company in time.

350 Modified Diphenyl Ether Laminated Glassfiber Sheet

350 Modified Diphenyl Ether Laminated Glassfiber Sheet

350  Modified diphenyl ether laminated glassfiber sheet
Standards:GB/T 1303.2-2009
This laminated sheet products using electrical non alkali glassfiber cloth impregnated with modified diphenyl resin and with baking hot pressed, has high mechanical and dielectric properties, radiation resistance, heat resistant grade H, applied in motor,electric appliance insulating accessories parts.

 

352 Polyester Imine Laminated Glassfiber Sheet

352 Polyester Imine Laminated Glassfiber Sheet

352  Polyester imine laminated glassfiber sheet
Standards: GB/T 1303.9-2009 / IEC60893-2:2003
This laminated sheet products made of non alkali glass fiber cloth impregnated with polyurethane resin by baking and hot pressing. This product has excellent heat resistance, electrical insulation, wave transmission, radiation resistance, flame retardancy, and mechanical properties. Heat resistant grade H is an ideal insulating material for class H electrical equipment.

Parameter

No.

Item

Unit

Index

3250

350

352

BMI GC301

BMI GC302

347

PAIGC301

1

Appearance

The surface is smooth, uniform color, no bubbles, wrinkles, neat edge cutting, no delamination in the section

2

Density

g/m³

1.8-1.95

3

Vertical flexural strength (normal)

MPa

≥320

≥300

≥300

≥350

≥380

≥350

≥400

4

Parallel layer impact strength (simple supported beam method)

KJ/m2

≥45

≥42

≥38

≥60

≥60

≥60

≥60

5

Vertical layer electrical strength (90 degrees transformer oil,1mm)

Kv/mm

≥8.0

≥8.0

≥14.0

≥14.0

≥14.0

≥14.0

≥14.0

6

Parallel layer breakdown voltage (90 degrees transformer oil)

kv

≥35

≥35

≥40

≥35

≥40

≥35

≥40

7

 Dielectric constant (50Hz)

≤4.5

≤5.5

≤5.5

≤5.5

≤5.5

≤5.5

≤5.5

8

 Dielectric loss factor (50Hz)

≤0.02

≤0.05

≤0.05

≤0.04

≤0.05

≤0.05

≤0.03

9

Insulation resistance after soaking

Ω

≥1.0*1010

≥1.0*1010

≥1.0*1010

≥1.0*108

≥1.0*108

≥1.0*108

≥1.0*108

10

 Resistance index

(PTI)

≥300

≥280

≥280

≥500

≥500

11

Combustibility

V-0

12

Temperature index

180

180

180

180

180

155

200

13

 Water absorption (thickness 1-20mm )

mg

32~125

64~200

64-193

64~193

64~193

64~193

64~227

Note: Due to continuous product improvement, the dimensions provided in this sample are for reference only. If necessary, our company can design and produce according to user requirements. Please contact the company in time.

3253 Polyamide Imide Laminated Glassfiber Sheet PAIGC301

3253 Polyamide Imide Laminated Glassfiber Sheet PAIGC301

3253  Polyamide imide laminated glassfiber sheet PAIGC301
Standards:GB/T 1303.11-2009
PAIGC301 ,one kind of laminated sheet product which made of non alkali glass fiber cloth dipped in PAI resin by baking and hot pressing. This product has excellent heat resistance, electrical insulation, wave transmission, radiation resistance, flame retardancy, and mechanical properties. Heat resistant grade H is an ideal insulating material for class H electrical equipment.

Parameter

No.

Item

Unit

Index

3250

350

352

BMI GC301

BMI GC302

347

PAIGC301

1

Appearance

The surface is smooth, uniform color, no bubbles, wrinkles, neat edge cutting, no delamination in the section

2

Density

g/m³

1.8-1.95

3

Vertical flexural strength (normal)

MPa

≥320

≥300

≥300

≥350

≥380

≥350

≥400

4

Parallel layer impact strength (simple supported beam method)

KJ/m2

≥45

≥42

≥38

≥60

≥60

≥60

≥60

5

Vertical layer electrical strength (90 degrees transformer oil,1mm)

Kv/mm

≥8.0

≥8.0

≥14.0

≥14.0

≥14.0

≥14.0

≥14.0

6

Parallel layer breakdown voltage (90 degrees transformer oil)

kv

≥35

≥35

≥40

≥35

≥40

≥35

≥40

7

 Dielectric constant (50Hz)

≤4.5

≤5.5

≤5.5

≤5.5

≤5.5

≤5.5

≤5.5

8

 Dielectric loss factor (50Hz)

≤0.02

≤0.05

≤0.05

≤0.04

≤0.05

≤0.05

≤0.03

9

Insulation resistance after soaking

Ω

≥1.0*1010

≥1.0*1010

≥1.0*1010

≥1.0*108

≥1.0*108

≥1.0*108

≥1.0*108

10

 Resistance index

(PTI)

≥300

≥280

≥280

≥500

≥500

11

Combustibility

V-0

12

Temperature index

180

180

180

180

180

155

200

13

 Water absorption (thickness 1-20mm )

mg

32~125

64~200

64-193

64~193

64~193

64~193

64~227

Note: Due to continuous product improvement, the dimensions provided in this sample are for reference only. If necessary, our company can design and produce according to user requirements. Please contact the company in time.

GC302 (Modified) Bismaleimide Glassfiber Sheet BMI GC301

GC302 (Modified) Bismaleimide Glassfiber Sheet BMI GC301

GC302 (Modified) bismaleimide glassfiber sheet  BMI GC301/ GC302
BMI GC301/BMI GC302 is one kind of laminated sheet products which made of alkali free fiberglass cloth impregnated with BMI resin by baking and pressing. This product has excellent heat resistance, electrical insulation, wave transmission, radiation resistance, flame retardancy, and mechanical properties. It is an ideal insulating material for class H electrical equipment
Standards: GB/T 1303.10-2009 / IEC60893-2:2003

Parameter

No.

Item

Unit

Index

3250

350

352

BMI GC301

BMI GC302

347

PAIGC301

1

Appearance

The surface is smooth, uniform color, no bubbles, wrinkles, neat edge cutting, no delamination in the section

2

Density

g/m³

1.8-1.95

3

Vertical flexural strength (normal)

MPa

≥320

≥300

≥300

≥350

≥380

≥350

≥400

4

Parallel layer impact strength (simple supported beam method)

KJ/m2

≥45

≥42

≥38

≥60

≥60

≥60

≥60

5

Vertical layer electrical strength (90 degrees transformer oil,1mm)

Kv/mm

≥8.0

≥8.0

≥14.0

≥14.0

≥14.0

≥14.0

≥14.0

6

Parallel layer breakdown voltage (90 degrees transformer oil)

kv

≥35

≥35

≥40

≥35

≥40

≥35

≥40

7

 Dielectric constant (50Hz)

≤4.5

≤5.5

≤5.5

≤5.5

≤5.5

≤5.5

≤5.5

8

 Dielectric loss factor (50Hz)

≤0.02

≤0.05

≤0.05

≤0.04

≤0.05

≤0.05

≤0.03

9

Insulation resistance after soaking

Ω

≥1.0*1010

≥1.0*1010

≥1.0*1010

≥1.0*108

≥1.0*108

≥1.0*108

≥1.0*108

10

 Resistance index

(PTI)

≥300

≥280

≥280

≥500

≥500

11

Combustibility

V-0

12

Temperature index

180

180

180

180

180

155

200

13

 Water absorption (thickness 1-20mm )

mg

32~125

64~200

64-193

64~193

64~193

64~193

64~227

Note: Due to continuous product improvement, the dimensions provided in this sample are for reference only. If necessary, our company can design and produce according to user requirements. Please contact the company in time.

Paper Phenolic Sheet/Bakelite Sheet(3021/PFCP)

Paper Phenolic Sheet/Bakelite Sheet(3021/PFCP)

X/XX/XPC/XXX Bakelite Sheet

Standard :GB/T 1303.6-2009 / IEC60893-2:2003
This product is made of insulating impregnated paper impregnated phenolic resin and then formed with baking hot pressing. It is with high mechanical and electrical properties. Products used for motors which require for high mechanical performance, and as insulation structural components in electrical equipment, also can be used in transformers.
Heat resistance class:Class E.

Parameter

No.

Project

Unit

3021

3025

3025—A

3026

3027

3241

1

Appearance

Smooth surface, uniform color, no bubbles, no wrinkles, edge cutting neat, no stratification.

2

Density

g/m³

1.25~1.4

1.3~1.4

1.75-1.90

3

Vertical layer bending strength(normality)

MPa

≥120

≥100

≥90

≥110

≥125

≥300

4

Tensile strength

MPa

≥100

≥80

5

Parallel impact strength

(Simply supported beam)

KJ/m2

≥7.8

≥50

6

Parallel layer shear strength

MPa

≥10

≥25

≥25

≥20

≥25

≥30

7

Adhesive strength

N

≥3600

8

Electrical strength

Vertical layer(in 90℃transformer oil )( thickness 1mm )

Kv/mm

≥15.8

≥5.1

≥5.1

≥5.1

≥5.1

≥8.0

Parallel layer breakdown voltage(in 90℃transformer oil )

kv

≥35

≥20

≥35

9

Insulation resistance after water immersion

Ω

≥5*107

≥1.0*108

10

Dielectric constant(1MHz)

≤5.5

11

PTI

≥100

12

Water absorbing ( thickness 1-20mm)

mg

180~970

206~406

136~277

64-193

Note: Due to continuous product improvement, the dimensions provided in this sample are for reference only. If necessary, our company can design and produce according to user requirements. Please contact the company in time.

Phenoilc Cotton Cloth Board/Bakelite Hylam Sheet/Tufnol Sheet

Phenoilc Cotton Cloth Board/Bakelite Hylam Sheet/Tufnol Sheet

3027 Phenolic Laminated Cotton Sheet
Standard: GB/T 1303.6-2009 / IEC60893-2:2003
This product use cotton impregnated with phenolic resin and formed by hot pressing, It has strong mechanical and electrical properties.Heat resistance class is E.

Parameter

No.

Project

Unit

3021

3025

3025—A

3026

3027

3241

1

Appearance

Smooth surface, uniform color, no bubbles, no wrinkles, edge cutting neat, no stratification.

2

Density

g/m³

1.25~1.4

1.3~1.4

1.75-1.90

3

Vertical layer bending strength(normality)

MPa

≥120

≥100

≥90

≥110

≥125

≥300

4

Tensile strength

MPa

≥100

≥80

5

Parallel impact strength

(Simply supported beam)

KJ/m2

≥7.8

≥50

6

Parallel layer shear strength

MPa

≥10

≥25

≥25

≥20

≥25

≥30

7

Adhesive strength

N

≥3600

8

Electrical strength

Vertical layer(in 90℃transformer oil )( thickness 1mm )

Kv/mm

≥15.8

≥5.1

≥5.1

≥5.1

≥5.1

≥8.0

Parallel layer breakdown voltage(in 90℃transformer oil )

kv

≥35

≥20

≥35

9

Insulation resistance after water immersion

Ω

≥5*107

≥1.0*108

10

Dielectric constant(1MHz)

≤5.5

11

PTI

≥100

12

Water absorbing ( thickness 1-20mm)

mg

180~970

206~406

136~277

64-193

 

Name

IEC name

Property

3025

PFCC201

Course cotton,Mechanical, electrical performance in general.

3025-A

PFCC202

Media-fine cotton,strong mechanical and electrical performance .

3026

PFCC203

Fine cotton,stronger mechanical and electrical performance.

3027

PFCC305

Electrical use fine cotton,higher mechanical electric and dielectric performance.

Note: Due to continuous product improvement, the dimensions provided in this sample are for reference only. If necessary, our company can design and produce according to user requirements. Please contact the company in time.

Lightweight Epoxy Fiberglass Board

Lightweight Epoxy Fiberglass Board

Lightweight Epoxy Fiberglass Board/Low Density Epoxy Sheet/Epoxy Sheet

It is made of electronic grade fiberglass cloth impregnated with epoxy resin, pre-cured by high temperature baking, laminated according to the required thickness, and then completed with constant pressure in vacuum environment. Mainly used in electronic products, equipment, communications facilities, automotive, rail transit and new energy.

Features: Low density epoxy sheet, based on epoxy sheet production process, re-matching with special materials and special processes to produce new products. This product has low density (0.8/0.9/1.45) ,high hardness and toughness, Halogen-free and flame retardant performance in line with EU ROHS certification standards .Typical application: e-book, iPad, Mobile phone holster lining reinforcement, light weight , high strength, with automatic sleep and wake-up function after install magnet.

Parameter

 

Factory Product Color Size Thickness Flame retardant Eco-friendly Water
absorption
Heat
resistance
Density
ZTelec Group Low density epoxy sheet Milky 1220*1020/1080*1220
/1040*1240
0.1-50 UL94-HB ROHS+Halogen free 0.0014 150-180°C/2Hr 0.8/1.4

Note: Due to continuous product improvement, the dimensions provided in this sample are for reference only. If necessary, our company can design and produce according to user requirements. Please contact the company in time.